Dryer error codes most often indicate a problem with the filter, heating, condensate drain or electronics. On this page you will find an overview of the most common error messages of dryers of various brands, including possible causes and solutions. Many problems can be solved by cleaning the filters, condenser or restarting the appliance.
Tumble dryer error codes and messages Tumble dryers are a common household item today, but like any appliance, a fault can occur over time. Modern dryers from Bosch, Siemens, Electrolux, AEG, Whirlpool, Indesit, LG or Samsung are equipped with a system of error codes that help quickly discover the cause of the problem.
On this page you will find an overview of the most common dryer error messages, their meaning and recommended solutions. Thanks to this, a number of faults can be solved by yourself without the need to call the service.
Dryer error codes can vary by brand and model, but most indicate similar problems – such as clogged filters, restricted air flow, a problem with heating or water drainage.
Error codes for tumble dryers – Bosch / Siemens / Neff
- E01 / E02 - problem with closing door or door lock
- E06 – an electronic or sensor error
- E09 - Heater or heating problem
- E18 - Condensate drain, pump or full water tank problem
- E20 - Electronics / motor error depending on model
- E24 - Fan or airflow problem
- E90 - Electronics or control communication error units
- Container Full - full condensate tank
- Clean Filter - clogged filter
- Clean Condenser - clogged condenser
Most common causes of errors:
- clogged filters
- clogged condenser
- faulty heating element
- pump problem
- electronics or motor fault.
Error codes for tumble dryers – Electrolux / AEG / Zanussi
- E20 / E21 - problem with water drain or pump
- E40 - door closing problem
- E50 - motor error
- E60 - heating problem
- E70 - temperature sensor error
- E90 - electronics or module communication
- Water Container Full - full water tank
- Clean Filter - clogged filter
- Condenser - clogged condenser or restricted air flow
- clogged water drain
- clogged filters,
- temperature sensor problem
- heating problem
- electronics error
- Error codes for tumble dryers – Whirlpool / Indesit
- F01 - motor error
- F03 - temperature sensor problem
- F05 - water drain problem
- F06 - electronics or button error
- F13 - problem with by heating or drying
- F15 – heating system error
- Door - door not closed properly
- Clean Filter - clogged filter
- Tank Full – full water tank
Most common causes of errors:
- engine problem
- defective sensor, clogged drain
- heating element malfunction
- clogged filters.
Error codes for tumble dryers – LG dE
- door not closed properly OE
- water drain problem tE
- temperature sensor error HE
- heating problem LE
- motor or drum error PF
- power failure
- Clean Filter - clogged filter
Most common causes of errors:
- door lock faulty
- sensor problem
- heating error
- motor malfunction
- power failure.
Error codes for tumble dryers – Samsung dE
- door open or not properly closed HE / HC
- heating problem 5E
- water drain problem tE
- temperature sensor error bE
- buttons or control panel problem
- fan or airflow problem
- Filter Check - clogged filter
- Tank Full - tank full condensate
Most common causes of errors:
- clogged filter
- faulty sensor
- fan problem
- heating malfunction
- electronics error.
The most common problems with dryers
The dryer does not dry clothes. The laundry remains damp even after the program has finished.
Possible causes:
- clogged filter
- clogged condenser
- weak heating
- dryer overloaded.
Solution:
- clean the filter and condenser
- check whether the dryer is overloaded, run a shorter test program.
Dryer does not heat The dryer is running, but clothes remain cold.
Possible causes:
- faulty heating element
- problem with thermostat or thermal fuse
- clogged filters
- electronics fault.
Solution:
- clean the filter
- check air flow
- restart the appliance
- check heating element.
Dryer shuts off during program - Program does not finish and dryer shuts off.
Possible causes:
- overheating
- clogged filters
- defective sensor.
Solution:
- clean the filter thoroughly
- check air flow
- let the appliance cool down.
The dryer reports a full water tank even when it is empty.
Possible causes:
- clogged pump
- clogged hoses
- faulty float.
Solution:
- clean tank and pump
- check hoses
Dryer is noisy Makes unusual noises during operation.
Possible causes:
- worn belt
- damaged bearings
- foreign object inside drum.
Solution:
- check drum
- remove foreign objects
- replace worn parts.
Dryer won't start
Possible causes:
- power problem
- door lock faulty
- electronics fault
Solution:
- check the socket and cable
- check the door is closed
- restart the appliance.
Most dryer problems are related to routine maintenance or wear and tear on parts. Regular cleaning of filters, condenser and air flow control can significantly extend the life of the appliance and prevent more expensive repairs. If the error remains even after cleaning and restarting the appliance, it may be a defect in the electronics, motor or heating system. In this case, we recommend contacting a qualified service.